Introduction The Moxa IEF-G9010 Series industrial next-generation Firewall can segment and hide your network and protect mission-critical assets with industrial-grade IPS and granular access control. Meanwhile, the Security Dashboard Console (SDC) software, when used together with the IEFG9010 Series, offers another layer of protection through centralized critical asset visibility, network analysis, and auto pattern updating.
Centrally Manage Network Security and Enhance OT Visibility The IEF-G9010 Series sniffers network traffic and gives users full visibility of current assets and connections, which helps administrators and operators understand the real-time conditions of the OT system. When connected to Security Dashboard Console, a security management platform, the administrators or operators can effectively manage and monitor all the intrusion prevention systems from a single space. This provides an easier way to monitor the devices and execute policy, firmware, and pattern updates.
Dynamically Prevent Malicious Cyber Threat Activity Affecting Your System The IEF-G9010 Series is designed to protect mission-critical assets at the OT network edge. It silently analyzes your network traffic in the background and offers granular behavior monitoring and control of cyber activities. These firewall devices provide both “Monitor” and “Protect” modes to facilitate different OT scenarios. Monitoring mode gives administrators full visibility of cyber threat activities. In the case of an emergency, administrators can easily switch to “Protect” mode to block and contain any malicious operations.
Industrial Protocol Whitelist Control for Mission-critical Assets Using advanced Deep Packet Inspection (DPI) technology, the IEF-G9010 Series is equipped with industrial protocol awareness to offer granular command of control system traffic to critical controllers.
Virtual Patching and Intelligent Threat Protection Frequent patching significantly reduces a system’s vulnerability to cyberthreats. However, patching continues to be a major challenge in OT environments because OT applications cannot afford interrupting operations by shutting down systems to apply patches. Virtual patching technology can help complement existing patch management processes by shielding known and unknown vulnerabilities. Virtual patching acts as an agentless emergency security tool that OT administrators and operators can use to address vulnerabilities on affected OT equipment quickly. The IEF-G9010 Series provides advanced protection against threats with up-to-date threat information and guards your systems against undisclosed and zero-day threats.
Flexible License Upgrades The IEF-G9010 Series supports flexible, on-demand expansion through Moxa’s license platform. As your network grows, you can purchase additional licenses based on your needs. The IEF-G9010 Series supports the following licenses:
IEF-New-1Y: 1-year, 1 node IEF license
IEF-Renew-1Y: 1-year, 1 node IEF renewal license
IEF-Renew-2Y: 2-year, 1 node IEF renewal license
IEF-Renew-4Y: 4-year, 1 node IEF renewal license
SDC-New-1Y: 1-year, 1 node SDC license
SDC-New-3Y: 3-year, 1 node SDC license
SDC-New-5Y: 5-year, 1 node SDC license
SDC-Renew-1Y: 1-year, 1 node SDC renewal license
SDC-Add-4Q: 1-year, 1 node SDC add-on license
Input/Output Interface
Buttons
Digital Input Channels
+13 to +30 V for state 1
-30 to +3 V for state 0
Max. input current: 8 mA
Alarm Contact Channels
Resistive load: 1 A @ 24 VDC
Ethernet Interface
10/100/1000BaseT(X) Ports (RJ45 connector)
1000BaseSFP Slots
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3u for 100BaseT(X)
LED Interface
LED Indicators
PWR1, PWR2, STATE, MGMT, IPS/IDS, HA, FUNC, USB, 10/100 Mbps copper port, 1000 Mbps copper port, 1000 Mbps SFP port
NAT
Features
N-to-1, 1-to-1, Port forwarding, NAT loopback
Application Layer Gateway (ALG)
Ethernet Software Features
Unicast Routing
Management
SSH, Telnet, NTP Client, DHCP Server/Client, DNS
Authentication
Local Account Accessibility
DoS and DDoS Protection
Technology
ICMP Flood, IGMP Flood, UDP Flood, UDP Port Scan, TCP SYN Flood, TCP Port SYN Scan, TCP Port FIN Scan, TCP Port NULL Scan, TCP Port Xmas Scan
Firewall
Throughput
Max. 360,000 packets per second (max. 1,000 Mbps)
IPS Throughput
> 450 Mbps when the packet size is greater than 128 bytes
Latency
Concurrent Connections (TCP)
Deep Packet Inspection
Modbus TCP
Modbus UDP
EtherNet/IP
PROFINET-DCP
CIP
Omron FINS
SLMP
Siemens S7 Comm.
Siemens S7 Comm. Plus
Additional protocols will be supported through future firmware updates.
Policy Enforcement Rules
ICS Protocol Filter Profiles
Automatic Pattern Updates via SDC
Pro Models: Supported (1 year of updates included)
Pro-H Models: Supported (requires IEF pattern update license)
Manual Pattern Updates
Pro Models: Supported (1 year of updates included)
Pro-H Models: Supported (requires IEF pattern update license)
Management
Supported Interfaces
Web GUI and Security Dashboard Console
Real-Time Firewall / VPN Event Log
Event Type
Cybersecurity, Policy enforcement, Protocol Filter, Assets detection, System event
Media
Local storage, Syslog server
Power Parameters
Connection
Input Current
1.265 A @ 12 VDC, 0.605 A @ 24 VDC, 0.308 A @ 48 VDC
Physical Characteristics
Housing
Dimensions
64 x 105 x 135 mm (2.52 x 4.13 x 5.32 in)
Weight
Installation
DIN-rail mounting, Wall mounting (with optional kit)
Environmental Limits
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
Safety
UL 60950-1 Ed.2, UL 62368-1
EMC
EN 55032/35, EN 61000-6-2/-6-4
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 0.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8 PFMF
Railway
Traffic Control
Shock
Freefall
Vibration
Features
Compact industrial next-generation firewall for network segmentationIndustrial-grade Intrusion Prevention/Detection System (IPS/IDS) Object-based policy enforcement rules for protocol filtering and traffic control Easy network setup with Network Address Translation (NAT) Full OT network visibility when used with Security Dashboard Console (SDC) -40 to 75°C wide operating temperature range (-T models)