 |
 |
 |
|
The NPort® 6450 is a 4-port device server that uses the SSL and SSH protocols to transmit encrypted serial data over Ethernet. Up to 4 serial devices of any type can be connected to the NPort® 6450, with all four devices using the same IP address. The Ethernet port can be configured for a normal or secure TCP/IP connection. No Data Loss if Ethernet Connection FailsThe NPort® 6450 is a reliable device server that provides users with secure serial-to-Ethernet data transmission and a customer-oriented hardware design. If the Ethernet connection fails, the NPort® 6450 will queue all serial data in its internal 64 KB port buffer. When the Ethernet connection is re-established, the NPort® 6450 will immediately release all data in the buffer in the order that it was received. Users can increase the port buffer size by installing a SD card.
|
Ethernet Interface
|
|
Number of Ports
|
1
|
|
Speed
|
10/100 Mbps, auto MDI/MDIX
|
|
Connector
|
8-pin RJ45
|
|
Magnetic Isolation
|
1.5 KV built-in
|
|
• Optical Fiber Interface (with network module)
|
|
Fiber Port
|
100BaseFX, SC connector
|
|
Distance
|
Multi-mode: 0 to 4 km, 1310 nm (62.5/125 µm, 500 MHz*km)
Single mode: 0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km))
|
|
Min. TX Output
|
Multi-mode: -20 dBm
Single-mode: -5 dBm
|
|
Max. TX Output
|
Multi-mode: -10 dBm
Single-mode: 0 dBm
|
|
Sensitivity
|
Multi-mode: -34 to -30 dBm
Single-mode: -36 to -32 dBm
|
|
• Serial Interface
|
|
Number of Ports
|
4
|
|
Serial Standards
|
RS-232/422/485
|
|
Connector
|
DB9 male
|
|
RS-485 Data Direction Control
|
ADDC® (Automatic Data Direction Control)
|
|
Serial Line Protection
|
15 KV ESD protection for all signals
|
|
Console Port
|
Serial port 1 doubles as RS-232 console port
|
|
• Serial Communication Parameters
|
|
Data Bits
|
5, 6, 7, 8
|
|
Stop Bits
|
1, 1.5, 2
|
|
Parity
|
None, Even, Odd, Space, Mark
|
|
Flow Control
|
RTS/CTS, DTR/DSR, XON/XOFF
|
|
Baudrate
|
50 bps to 921.6 Kbps (supports non-standard baudrates)
|
|
Pull High/Low Resistor for RS-485
|
1 KΩ, 150 KΩ
|
|
• Serial Signals
|
|
RS-232
|
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
|
|
RS-422
|
Tx+, Tx-, Rx+, Rx-, GND
|
|
RS-485-4w
|
Tx+, Tx-, Rx+, Rx-, GND
|
|
RS-485-2w
|
Data+, Data-, GND
|
|
• Memory Expansion Slot
|
|
Slot Type
|
SD socket (supports up to 2 GB)
|
|
• Software
|
|
Network Protocols
|
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, ARP, PPPoE
|
|
Security Protocols
|
DES, 3DES, AES, SSH, SSL
|
|
Configuration Options
|
Web Console, Serial Console, Telnet Console, Windows Search Utility
|
|
Windows Real COM Drivers
|
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
|
|
Fixed TTY Drivers
|
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x
|
|
Linux Real TTY Drivers
|
Linux kernel 2.4.x, 2.6.x
|
|
Management
|
SNMP MIB-II
|
|
IP Routing
|
Static, RIP-I, RIP-II
|
|
• Operation Modes
|
|
Standard
|
Real
COM, TCP Server, TCP Client, UDP, Pair Connection, RFC2217, Terminal,
Reverse Telnet, Ethernet Modem, Printer, PPP, Disabled
|
|
Secure
|
Secure Real COM, Secure TCP Server, Secure TCP Client, Secure Pair Connection, SSH, Reverse SSH
|
|
• Applications
|
|
Terminal Sessions
|
8 sessions per port
|
|
• Physical Characteristics
|
|
Housing
|
Metal, IP30 protection
|
|
Weight
|
1020 g
|
|
Dimensions
|
Without ears: 158 x 103 x 35 mm (6.22 x 4.06 x 1.38 in)
With ears: 181 x 103 x 35 mm (7.13 x 4.06 x 1.38 in)
|
|
• Environmental Limits
|
|
Operating Temperature
|
0 to 55°C (32 to 131°F)
|
|
Storage Temperature
|
-40 to 75°C (-40 to 167°F)
|
|
Ambient Relative Humidity
|
5 to 95% (non-condensing)
|
|
• Power Requirements
|
|
Input Voltage
|
12 to 48 VDC
|
|
Power Consumption
|
730 mA @ 12 V, 330 mA @ 24 V
|
|
Alarm Contact
|
Relay output with current carrying capacity of 1 A @ 24 VDC
|
|
Power Line Protection
|
1 KV burst (EN61000-4-4: EFT/B), 0.5 KV surge (EN61000-4-5)
|
|
• Standards and Certifications
|
|
Safety
|
UL 60950-1, EN 60950-1
|
|
EMC
|
CE, FCC
|
|
EMI
|
EN 55022 Class A, FCC Part 15 Subpart B Class A
|
|
EMS
|
EN 55024,
EN 61000-4-2 (ESD) Level 2/3,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-4 (EFT) Level 2,
EN 61000-4-5 (Surge) Level 2,
EN 61000-4-6 (CS) Level 2,
EN 61000-4-8 Level 1,
EN 61000-4-11
|
|
Freefall
|
IEC-68-2-6, IEC-68-2-34, IEC-68-2-32
|
|
Vibration
|
IEC-68-2-6, IEC-68-2-34
|
|
Green Product
|
RoHS, CRoHS, WEEE
|
|
• Reliability
|
|
Alert Tools
|
Built-in buzzer and RTC (real-time clock)
|
|
Automatic Reboot Trigger
|
Built-in WDT (watchdog timer)
|
|
MTBF (mean time between failures)
|
120,354 hrs
|
|
• Warranty
|
|
Warranty Period
|
5 years
|
Dimensions
Pin Assignment
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- LCD panel for easy IP address configuration (standard temp. models)
- Secure operation modes for Real COM, TCP Server, TCP Client, Pair Connection, Terminal, and Reverse Terminal
- Non-standard baudrates supported with high precision
- Port buffers for storing serial data when the Ethernet is off-line
- Supports IPv6
- Ethernet redundancy (STP/RSTP/Turbo Ring) with network module
- Generic serial commands supported in Command-by-Command mode
|
|
|
|
|
|
|